A repository for interferometer controller code, hardware, and simulations.
See dses.science for more information on the Deep Space Exploration Society.
TODO
To view/edit the KiCAD schematic, with KiCAD 6 open, go to Preferences -> Configure Paths, and add a new environment variable called "EWB" that points to dses-interferometer-controller\Hardware\lib.
Install the 64 bit Raspberry Pi OS with Desktop. Configure the hostname and enable SSH with the right username and password.
#Install the PyPy 3.9 Version of Conda Forge: Miniforge3-Linux-aarch64.
#Use the default install directory, and allow it to initialize the base environment by default.
wget https://github.com/conda-forge/miniforge/releases/latest/download/Mambaforge-pypy3-Linux-aarch64.sh
sudo chmod +x Mambaforge-pypy3-Linux-aarch64.sh
./Mambaforge-pypy3-Linux-aarch64.sh
source ~/.bashrc #this will initialize the base env
mamba update python #update python
mamba create -n radioconda -c conda-forge -c ryanvolz --only-deps radioconda #Install radioconda
conda activate radioconda
#Blacklist bad drivers
sudo ln -s $CONDA_PREFIX/etc/modprobe.d/rtl-sdr-blacklist.conf /etc/modprobe.d/radioconda-rtl-sdr-blacklist.conf
sudo modprobe -r $(cat $CONDA_PREFIX/etc/modprobe.d/rtl-sdr-blacklist.conf | sed -n -e 's/^blacklist //p')
#Udev rule
sudo ln -s $CONDA_PREFIX/lib/udev/rules.d/rtl-sdr.rules /etc/udev/rules.d/radioconda-rtl-sdr.rules
sudo udevadm control --reload
sudo udevadm trigger
#test the installation (plug in an RTL-SDR)
rtl_testUse Python 3.9.