Green is a clean, colorful, fast python test runner.

Overview

Version CI Status Coverage Status

Green -- A clean, colorful, fast python test runner.

Features

  • Clean - Low redundancy in output. Result statistics for each test is vertically aligned.
  • Colorful - Terminal output makes good use of color when the terminal supports it.
  • Fast - Tests run in independent processes. (One per processor by default. Does not play nicely with gevent)
  • Powerful - Multi-target + auto-discovery.
  • Traditional - Use the normal unittest classes and methods for your unit tests.
  • Descriptive - Multiple verbosity levels, from just dots to full docstring output.
  • Convenient - Bash-completion and ZSH-completion of options and test targets.
  • Thorough - Built-in integration with coverage.
  • Embedded - Can be run with a setup command without in-site installation.
  • Modern - Supports Python 3.5+. Additionally, PyPy is supported on a best-effort basis.
  • Portable - macOS, Linux, and BSDs are fully supported. Windows is supported on a best-effort basis.
  • Living - This project grows and changes. See the changelog

Community

  • For questions, comments, or feature requests, please open a discussion
  • For bug reports, please submit an issue to the GitHub issue tracker for Green.
  • Submit a pull request with a bug fix or new feature.
  • 💖 Sponsor the maintainer to support this project

Training Course

There is a training course available if you would like professional training: Python Testing with Green.

Python Testing with Green

Screenshots

Top: With Green! Bottom: Without Green :-(

Python Unit Test Output

Quick Start

pip3 install green    # To upgrade: "pip3 install --upgrade green"

Now run green...

# From inside your code directory
green

# From outside your code directory
green code_directory

# A specific file
green test_stuff.py

# A specific test inside a large package.
#
# Assuming you want to run TestClass.test_function inside
# package/test/test_module.py ...
green package.test.test_module.TestClass.test_function

# To see all examples of all the failures, errors, etc. that could occur:
green green.examples


# To run Green's own internal unit tests:
green green

For more help, see the complete command-line options or run green --help.

Config Files

Configuration settings are resolved in this order, with settings found later in the resolution chain overwriting earlier settings (last setting wins).

  1. $HOME/.green
  2. A config file specified by the environment variable $GREEN_CONFIG
  3. setup.cfg in the current working directory of test run
  4. .green in the current working directory of the test run
  5. A config file specified by the command-line argument --config FILE
  6. Command-line arguments

Any arguments specified in more than one place will be overwritten by the value of the LAST place the setting is seen. So, for example, if a setting is turned on in ~/.green and turned off by a command-line argument, then the setting will be turned off.

Config file format syntax is option = value on separate lines. option is the same as the long options, just without the double-dash (--verbose becomes verbose).

Most values should be True or False. Accumulated values (verbose, debug) should be specified as integers (-vv would be verbose = 2).

Example:

verbose       = 2
logging       = True
omit-patterns = myproj*,*prototype*

Troubleshooting

One easy way to avoid common importing problems is to navigate to the parent directory of the directory your python code is in. Then pass green the directory your code is in and let it autodiscover the tests (see the Tutorial below for tips on making your tests discoverable).

cd /parent/directory
green code_directory

Another way to address importing problems is to carefully set up your PYTHONPATH environment variable to include the parent path of your code directory. Then you should be able to just run green from inside your code directory.

export PYTHONPATH=/parent/directory
cd /parent/directory/code_directory
green

Integration

Bash and Zsh

To enable Bash-completion and Zsh-completion of options and test targets when you press Tab in your terminal, add the following line to the Bash or Zsh config file of your choice (usually ~/.bashrc or ~/.zshrc)

which green >& /dev/null && source "$( green --completion-file )"

Coverage

Green has built-in integration support for the coverage module. Add -r or --run-coverage when you run green.

setup.py command

Green is available as a setup.py runner, invoked as any other setup command:

python setup.py green

This requires green to be present in the setup_requires section of your setup.py file. To run green on a specific target, use the test_suite argument (or leave blank to let green discover tests itself):

# setup.py
from setuptools import setup

setup(
    ...
    setup_requires = ['green'],
    # test_suite = "my_project.tests"
)

You can also add an alias to the setup.cfg file, so that python setup.py test actually runs green:

# setup.cfg

[aliases]
test = green

Django

Django can use green as the test runner for running tests.

  • To just try it out, use the --testrunner option of manage.py:
./manage.py test --testrunner=green.djangorunner.DjangoRunner
  • Make it persistent by adding the following line to your settings.py:
TEST_RUNNER="green.djangorunner.DjangoRunner"
  • For verbosity, green adds an extra command-line option to manage.py which you can pass the number of v's you would have used on green.
./manage.py test --green-verbosity 3

nose-parameterized

Green will run generated tests created by nose-parameterized. They have lots of examples of how to generate tests, so follow the link above if you're interested.

Unit Test Structure Tutorial

This tutorial covers:

  • External structure of your project (directory and file layout)
  • Skeleton of a real test module
  • How to import stuff from your project into your test module
  • Gotchas about naming...everything.
  • Where to run green from and what the output could look like.
  • DocTests

For more in-depth online training please check out Python Testing with Green:

  • Layout your test packages and modules correctly
  • Organize your tests effectively
  • Learn the tools in the unittest and mock modules
  • Write meaningful tests that enable quick refactoring
  • Learn the difference between unit and integration tests
  • Use advanced tips and tricks to get the most out of your tests
  • Improve code quality
  • Refactor code without fear
  • Have a better coding experience
  • Be able to better help others

External Structure

This is what your project layout should look like with just one module in your package:

proj                  # 'proj' is the package
├── __init__.py
├── foo.py            # 'foo' (or proj.foo) is the only "real" module
└── test              # 'test' is a sub-package
    ├── __init__.py
    └── test_foo.py   # 'test_foo' is the only "test" module

Notes:

  1. There is an __init__.py in every directory. Don't forget it. It can be an empty file, but it needs to exist.

  2. proj itself is a directory that you will be storing somewhere. We'll pretend it's in /home/user

  3. The test directory needs to start with test.

  4. The test modules need to start with test.

When your project starts adding code in sub-packages, you will need to make a choice on where you put their tests. I prefer to create a test subdirectory in each sub-package.

proj
├── __init__.py
├── foo.py
├── subpkg
│   ├── __init__.py
│   ├── bar.py
│   └── test              # test subdirectory in every sub-package
│       ├── __init__.py
│       └── test_bar.py
└── test
    ├── __init__.py
    └── test_foo.py

The other option is to start mirroring your subpackage layout from within a single test directory.

proj
├── __init__.py
├── foo.py
├── subpkg
│   ├── __init__.py
│   └── bar.py
└── test
    ├── __init__.py
    ├── subpkg            # mirror sub-package layout inside test dir
    │   ├── __init__.py
    │   └── test_bar.py
    └── test_foo.py

Skeleton of Test Module

Assume foo.py contains the following contents:

def answer():
    return 42

class School():

    def food(self):
        return 'awful'

    def age(self):
        return 300

Here's a possible version of test_foo.py you could have.

# Import stuff you need for the unit tests themselves to work
import unittest

# Import stuff that you want to test.  Don't import extra stuff if you don't
# have to.
from proj.foo import answer, School

# If you need the whole module, you can do this:
#     from proj import foo
#
# Here's another reasonable way to import the whole module:
#     import proj.foo as foo
#
# In either case, you would obviously need to access objects like this:
#     foo.answer()
#     foo.School()

# Then write your tests

class TestAnswer(unittest.TestCase):

    def test_type(self):
        "answer() returns an integer"
        self.assertEqual(type(answer()), int)

    def test_expected(self):
        "answer() returns 42"
        self.assertEqual(answer(), 42)

class TestSchool(unittest.TestCase):

    def test_food(self):
        school = School()
        self.assertEqual(school.food(), 'awful')

    def test_age(self):
        school = School()
        self.assertEqual(school.age(), 300)

Notes:

  1. Your test class must subclass unittest.TestCase. Technically, neither unittest nor Green care what the test class is named, but to be consistent with the naming requirements for directories, modules, and methods we suggest you start your test class with Test.

  2. Start all your test method names with test.

  3. What a test class and/or its methods actually test is entirely up to you. In some sense it is an artform. Just use the test classes to group a bunch of methods that seem logical to go together. We suggest you try to test one thing with each method.

  4. The methods of TestAnswer have docstrings, while the methods on TestSchool do not. For more verbose output modes, green will use the method docstring to describe the test if it is present, and the name of the method if it is not. Notice the difference in the output below.

DocTests

Green can also run tests embedded in documentation via Python's built-in doctest module. Returning to our previous example, we could add docstrings with example code to our foo.py module:

def answer():
    """
    >>> answer()
    42
    """
    return 42

class School():

    def food(self):
        """
        >>> s = School()
        >>> s.food()
        'awful'
        """
        return 'awful'

    def age(self):
        return 300

Then in some test module you need to add a doctest_modules = [ ... ] list to the top-level of the test module. So lets revisit test_foo.py and add that:

# we could add this to the top or bottom of the existing file...

doctest_modules = ['proj.foo']

Then running green -vv might include this output:

  DocTests via `doctest_modules = [...]`
.   proj.foo.School.food
.   proj.foo.answer

...or with one more level of verbosity (green -vvv)

  DocTests via `doctest_modules = [...]`
.   proj.foo.School.food -> /Users/cleancut/proj/green/example/proj/foo.py:10
.   proj.foo.answer -> /Users/cleancut/proj/green/example/proj/foo.py:1

Notes:

  1. There needs to be at least one unittest.TestCase subclass with a test method present in the test module for doctest_modules to be examined.

Running Green

To run the unittests, we would change to the parent directory of the project (/home/user in this example) and then run green proj.

In a real terminal, this output is syntax highlighted

$ green proj
....

Ran 4 tests in 0.125s using 8 processes

OK (passes=4)

Okay, so that's the classic short-form output for unit tests. Green really shines when you start getting more verbose:

In a real terminal, this output is syntax highlighted

$ green -vvv proj
Green 3.0.0, Coverage 4.5.2, Python 3.7.4

test_foo
  TestAnswer
.   answer() returns 42
.   answer() returns an integer
  TestSchool
.   test_age
.   test_food

Ran 4 tests in 0.123s using 8 processes

OK (passes=4)

Notes:

  1. Green outputs clean, hierarchical output.

  2. Test status is aligned on the left (the four periods correspond to four passing tests)

  3. Method names are replaced with docstrings when present. The first two tests have docstrings you can see.

  4. Green always outputs a summary of statuses that will add up to the total number of tests that were run. For some reason, many test runners forget about statuses other than Error and Fail, and even the built-in unittest runner forgets about passing ones.

  5. Possible values for test status (these match the unittest short status characters exactly)

  • . Pass
  • F Failure
  • E Error
  • s Skipped
  • x Expected Failure
  • u Unexpected pass

Origin Story

Green grew out of a desire to see pretty colors. Really! A big part of the whole Red/Green/Refactor process in test-driven-development is actually getting to see red and green output. Most python unit testing actually goes Gray/Gray/Refactor (at least on my terminal, which is gray text on black background). That's a shame. Even TV is in color these days. Why not terminal output? Even worse, the default output for most test runners is cluttered, hard-to-read, redundant, and the dang status indicators are not lined up in a vertical column! Green fixes all that.

But how did Green come to be? Why not just use one of the existing test runners out there? It's an interesting story, actually. And it starts with trial.

trial

I really like Twisted's trial test runner, though I don't really have any need for the rest of the Twisted event-driven networking engine library. I started professionally developing in Python when version 2.3 was the latest, greatest version and none of us in my small shop had ever even heard of unit testing (gasp!). As we grew, we matured and started testing and we chose trial to do the test running. If most of my projects at my day job hadn't moved to Python 3, I probably would have just stuck with trial, but at the time I wrote green trial didn't run on Python 3 (but since 15.4.0 it does). Trial was and is the foundation for my inspiration for having better-than-unittest output in the first place. It is a great example of reducing redundancy (report module/class once, not on every line), lining up status vertically, and using color. I feel like Green trumped trial in two important ways: 1) It wasn't a part of an immense event-driven networking engine, and 2) it was not stuck in Python 2 as trial was at the time. Green will obviously never replace trial, as trial has features necessary to run asynchronous unit tests on Twisted code. After discovering that I couldn't run trial under Python 3, I next tried...

nose

I had really high hopes for nose. It seemed to be widely accepted. It seemed to be powerful. The output was just horrible (exactly the same as unittest's output). But it had a plugin system! I tried all the plugins I could find that mentioned improving upon the output. When I couldn't find one I liked, I started developing Green (yes, this Green) as a plugin for nose. I chose the name Green for three reasons: 1) It was available on PyPi! 2) I like to focus on the positive aspect of testing (everything passes!), and 3) It made a nice counterpoint to several nose plugins that had "Red" in the name. I made steady progress on my plugin until I hit a serious problem in the nose plugin API. That's when I discovered that nose is in maintenance mode -- abandoned by the original developers, handed off to someone who won't fix anything if it changes the existing behavior. What a downer. Despite the huge user base, I already consider nose dead and gone. A project which will not change (even to fix bugs!) will die. Even the maintainer keeps pointing everyone to...

nose2

So I pivoted to nose2! I started over developing Green (same repo -- it's in the history). I can understand the allure of a fresh rewrite as much as the other guy. Nose had made less-than-ideal design decisions, and this time they would be done right! Hopefully. I had started reading nose code while writing the plugin for it, and so I dived deep into nose2. And ran into a mess. Nose2 is alpha. That by itself is not necessarily a problem, if the devs will release early and often and work to fix things you run into. I submitted a 3-line pull request to fix some problems where the behavior did not conform to the already-written documentation which broke my plugin. The pull request wasn't initially accepted because I (ironically) didn't write unit tests for it. This got me thinking "I can write a better test runner than this". I got tired of the friction dealing with the nose/nose2 and decided to see what it would take to write my own test runner. That brought be to...

unittest

I finally went and started reading unittest (Python 2.7 and 3.4) source code. unittest is its own special kind of mess, but it's universally built-in, and most importantly, subclassing or replacing unittest objects to customize the output looked a lot easier than writing a plugin for nose and nose2. And it was, for the output portion! Writing the rest of the test runner turned out to be quite a project, though. I started over on Green again, starting down the road to what we have now. A custom runner that subclasses or replaces bits of unittest to provide exactly the output (and other feature creep) that I wanted.

I had three initial goals for Green:

  1. Colorful, clean output (at least as good as trial's)
  2. Run on Python 3
  3. Try to avoid making it a huge bundle of tightly-coupled, hard-to-read code.

I contend that I nailed 1. and 2., and ended up implementing a bunch of other useful features as well (like very high performance via running tests in parallel in multiple processes). Whether I succeeded with 3. is debatable. I continue to try to refactor and simplify, but adding features on top of a complicated bunch of built-in code doesn't lend itself to the flexibility needed for clear refactors.

Wait! What about the other test runners?

  • pytest -- Somehow I never realized pytest existed until a few weeks before I released Green 1.0. Nowadays it seems to be pretty popular. If I had discovered it earlier, maybe I wouldn't have made Green! Hey, don't give me that look! I'm not omniscient!

  • tox -- I think I first ran across tox only a few weeks before I heard of pytest. It's homepage didn't mention anything about color, so I didn't try using it.

  • the ones I missed -- Er, haven't heard of them yet either.

I'd love to hear your feedback regarding Green. Like it? Hate it? Have some awesome suggestions? Whatever the case, go open a discussion

Owner
Nathan Stocks
Engineering Manager, Git Storage by day. Rust Instructor & Indie Game Dev by night. Family, Food, Rust, Python, Game Engines, Open Source, Maple Trees.
Nathan Stocks
Pytest modified env

Pytest plugin to fail a test if it leaves modified os.environ afterwards.

wemake.services 7 Sep 11, 2022
Automatic SQL injection and database takeover tool

sqlmap sqlmap is an open source penetration testing tool that automates the process of detecting and exploiting SQL injection flaws and taking over of

sqlmapproject 25.7k Jan 04, 2023
Whatsapp messages bulk sender using Python Selenium.

Whatsapp Sender Whatsapp Sender automates sending of messages via Whatsapp Web. The tool allows you to send whatsapp messages in bulk. This program re

Yap Yee Qiang 3 Jan 23, 2022
The successor to nose, based on unittest2

Welcome to nose2 nose2 is the successor to nose. It's unittest with plugins. nose2 is a new project and does not support all of the features of nose.

736 Dec 16, 2022
Front End Test Automation with Pytest Framework

Front End Test Automation Framework with Pytest Installation and running instructions: 1. To install the framework on your local machine: clone the re

Sergey Kolokolov 2 Jun 17, 2022
Cloint India Pvt. Ltd's (ClointFusion) Pythonic RPA (Automation) Platform

Welcome to , Made in India with ❤️ Description Cloint India Pvt. Ltd - Python functions for Robotic Process Automation shortly RPA. What is ClointFusi

Cloint India Pvt. Ltd 31 Apr 12, 2022
Codeforces Test Parser for C/C++ & Python on Windows

Codeforces Test Parser for C/C++ & Python on Windows Installation Run pip instal

Minh Vu 2 Jan 05, 2022
Pyramid debug toolbar

pyramid_debugtoolbar pyramid_debugtoolbar provides a debug toolbar useful while you're developing your Pyramid application. Note that pyramid_debugtoo

Pylons Project 95 Sep 17, 2022
This is a Python script for Github Bot which uses Selenium to Automate things.

github-follow-unfollow-bot This is a Python script for Github Bot which uses Selenium to Automate things. Pre-requisites :- Python A Github Account Re

Chaudhary Hamdan 10 Jul 01, 2022
Load Testing ML Microservices for Robustness and Scalability

The demo is aimed at getting started with load testing a microservice before taking it to production. We use FastAPI microservice (to predict weather) and Locust to load test the service (locally or

Emmanuel Raj 13 Jul 05, 2022
Useful additions to Django's default TestCase

django-test-plus Useful additions to Django's default TestCase from REVSYS Rationale Let's face it, writing tests isn't always fun. Part of the reason

REVSYS 546 Dec 22, 2022
Yet another python home automation project. Because a smart light is more than just on or off

Automate home Yet another home automation project because a smart light is more than just on or off. Overview When talking about home automation there

Maja Massarini 62 Oct 10, 2022
A pytest plugin, that enables you to test your code that relies on a running PostgreSQL Database

This is a pytest plugin, that enables you to test your code that relies on a running PostgreSQL Database. It allows you to specify fixtures for PostgreSQL process and client.

Clearcode 252 Dec 21, 2022
This repository contnains sample problems with test cases using Cormen-Lib

Cormen Lib Sample Problems Description This repository contnains sample problems with test cases using Cormen-Lib. These problems were made for the pu

Cormen Lib 3 Jun 30, 2022
Aioresponses is a helper for mock/fake web requests in python aiohttp package.

aioresponses Aioresponses is a helper to mock/fake web requests in python aiohttp package. For requests module there are a lot of packages that help u

402 Jan 06, 2023
Python drivers for YeeNet firmware

yeenet-router-driver-python Python drivers for YeeNet firmware This repo is under heavy development. Many or all of these scripts are not likely to wo

Jason Paximadas 1 Dec 26, 2021
A friendly wrapper for modern SQLAlchemy and Alembic

A friendly wrapper for modern SQLAlchemy (v1.4 or later) and Alembic. Documentation: https://jpsca.github.io/sqla-wrapper/ Includes: A SQLAlchemy wrap

Juan-Pablo Scaletti 129 Nov 28, 2022
PyAutoEasy is a extension / wrapper around the famous PyAutoGUI, a cross-platform GUI automation tool to replace your boooring repetitive tasks.

PyAutoEasy PyAutoEasy is a extension / wrapper around the famous PyAutoGUI, a cross-platform GUI automation tool to replace your boooring repetitive t

Dingu Sagar 7 Oct 27, 2022
A twitter bot that simply replies with a beautiful screenshot of the tweet, powered by poet.so

Poet this! Replies with a beautiful screenshot of the tweet, powered by poet.so Installation git clone https://github.com/dhravya/poet-this.git cd po

Dhravya Shah 30 Dec 04, 2022
pytest plugin providing a function to check if pytest is running.

pytest-is-running pytest plugin providing a function to check if pytest is running. Installation Install with: python -m pip install pytest-is-running

Adam Johnson 21 Nov 01, 2022