SPI driven CircuitPython driver for PCA9745B constant current LED driver.

Overview

Introduction

THIS IS VERY MUCH ALPHA AND IN ACTIVE DEVELOPMENT.

THINGS WILL BREAK!

THIS MAY ALSO BREAK YOUR THINGS!

Documentation Status Discord Build Status Code Style: Black

SPI driven CircuitPython driver for NXP PCA9745B constant current LED driver.

Dependencies

This driver depends on:

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle or individual libraries can be installed using circup.

Installing from PyPI

Note

This library is not available on PyPI yet. Install documentation is included as a standard element. Stay tuned for PyPI availability!

.. todo:: Remove the above note if PyPI version is/will be available at time of release.

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install fergcorp-circuitpython-pca9745b

To install system-wide (this may be required in some cases):

sudo pip3 install fergcorp-circuitpython-pca9745b

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install fergcorp-circuitpython-pca9745b

Installing to a Connected CircuitPython Device with Circup

Make sure that you have circup installed in your Python environment. Install it with the following command if necessary:

pip3 install circup

With circup installed and your CircuitPython device connected use the following command to install:

circup install pca9745b

Or the following command to update an existing version:

circup update

Usage Example

.. todo:: Add a quick, simple example. It and other examples should live in the

examples folder and be included in docs/examples.rst.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.

Owner
Andrew Ferguson
Andrew Ferguson
Using a GNSS module (Beidou + GPS) and the mapquest static map API

Using a GNSS module (Beidou + GPS) and the mapquest static map API

Kongduino 1 Nov 04, 2021
Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Mark McIntyre 64 Oct 11, 2022
DOS-like OS for RP2040 basic microcontroller boards

Micropython DOS-like OS for RP2040 microcontroller boards. Check out the demo video at https://www.youtube.com/watch?v=Az_oiq8GE4Y To start the OS typ

RetiredWizard 58 Dec 27, 2022
Isaac Gym Environments for Legged Robots

Isaac Gym Environments for Legged Robots This repository provides the environment used to train ANYmal (and other robots) to walk on rough terrain usi

Robotic Systems Lab - Legged Robotics at ETH Zürich 372 Jan 08, 2023
A python script to poll RPi GPIO pins and subscribe and publish their state via MQTT

MQTT-GPIO A python script to poll RPi GPIO pins and subscribe and publish their state via MQTT using TLS. This script is short and meant to be edited

23 Oct 12, 2021
Poupool is an overflow swimming pool control software

Poupool - The swimming pool controller Poupool is a swimming pool control software. It is based on Transitions, Pykka and Paho MQTT. The user interfac

Cyril Jaquier 8 Jul 18, 2022
Component for deep integration LedFx from Home Assistant.

LedFX for Home Assistant Component for deep integration LedFx from Home Assistant. Table of Contents FAQ Install Config Performance FAQ Q. What versio

Dmitry Mamontov 28 Dec 13, 2022
A 3rd party Moonraker component to create timelapse of 3D prints.

A 3rd party Moonraker component to create timelapse of 3D prints.

Mainsail-Crew 166 Dec 26, 2022
Home Assistant custom component to help ev-chargers stay below peak hourly energy levels.

Peaqev ev-charging Peaqev ev-charging is an attempt of charging an ev without breaching a preset monthly max-peak energy level. In order for this inte

Magnus Eldén 35 Dec 24, 2022
Workshop for student hackathons focused on IoT dev

Scenario: The Mutt Matcher (IoT version) According to the World Health Organization there are more than 200 million stray dogs worldwide. The American

Microsoft 15 Aug 10, 2022
LED effects plugin for klipper

This plugin allows Klipper to run effects and animations on addressable LEDs, such as Neopixels, WS2812 or SK6812.

Julian Schill 238 Jan 04, 2023
Custom component for MPC-HC for home-assistant

mpc_hc The current mpchc integration in homeassistant violates ADR0004, so it will be deleted from core. This is just the existing integration copied

3 Dec 15, 2022
Volkswagen ID component for Home Assistant

Volkswagen ID component for Home Assistant This folder contains both a generic Python 3 library for the Volkswagen ID API and a component for Home Ass

55 Jan 07, 2023
Code for the paper "Planning with Diffusion for Flexible Behavior Synthesis"

Planning with Diffusion Training and visualizing of diffusion models from Planning with Diffusion for Flexible Behavior Synthesis. Guided sampling cod

Michael Janner 310 Jan 07, 2023
ArduinoWaterHeaterIOT - IoT Probe of a solar PV water heating system - Arduino, Python, MQTT, MySQL

ArduinoWaterHeaterIOT IoT Probe of a solar PV water heating system - Arduino, Raspberry Pi, Python, MQTT, MySQL The Arduino sends the AC and DC watts

Jacques Fourie 1 Jan 11, 2022
Pure micropython ESP32 SPI driver for sdcard and screen at the same SPI bus

micropython-esp32-spi-sdcard-and-screen-driver Proof of concept of Pure micropython espidf SPI driver for sdcard with screen at the same SPI bus (exam

Thomas Favennec 7 Mar 14, 2022
Python information display framework aimed at e-ink devices

My display, using a Raspberry Pi Zero W and Waveshare 6" e-paper hat infodisplay Modular information display framework aimed at e-ink devices. Built u

Niek Blankers 3 Apr 08, 2022
Micropython automatic watering

micropython-automatic-watering micropython automatic watering his code was developed to be used with nodemcu esp8266, but can be modified to work with

1 Nov 24, 2021
Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms.

Robo Arm :: Rigging Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms. It construct serial links(a kind

2 Nov 18, 2021
An arduino/ESP project that can play back G-Force data previously recorded

An arduino/ESP project that can play back G-Force data previously recorded

7 Apr 12, 2022