Raspberry Pi Power Button - Wake/Power Off/Restart(Double Press)

Overview

Raspberry Pi Power Button - Wake/Power Off/Restart(Double Press)

Information

When Raspberry Pi is powered off, shortening GPIO3 (Pin 5) to ground will wake the Raspberry Pi.

This script uses pin GPIO3(5), Ground(6) with momentary button.

gpio layout

Requirements

  • python3-gpiozero

Can be install via apt

sudo apt install python3-gpiozero

Install

This will install the script as service and it will run at boot

curl https://raw.githubusercontent.com/fire1ce/raspberry-pi-power-button/main/install.sh | bash

Uninstall

curl https://raw.githubusercontent.com/fire1ce/raspberry-pi-power-button/main/uninstall.sh | bash

Default Behavior

Button Press (Raspberry Pi is ON) Behavior
Single Nothing
Double Reboot
Long press and releases (above 3 seconds) Power off
Button Press (Raspberry Pi is OFF) Behavior
Single Power On

Check if service is running

sudo systemctl status power_button.service
A flexible data historian based on InfluxDB, Grafana, MQTT and more. Free, open, simple.

Kotori Telemetry data acquisition and sensor networks for humans. Documentation: https://getkotori.org/ Source Code: https://github.com/daq-tools/koto

83 Nov 26, 2022
Simple Microservice to control 433Mhz wireless sockets over HTTP, e.g. on a RaspberryPi

REST-light is a simple microservice to control 433Mhz wireless sockets over HTTP, e.g. on a RaspberryPi. The main usage is an easy integration of 433M

Pascal Höhnel 1 Jan 09, 2022
Simple python3 implementation of microKanren with lots of type annotations for clarity

MicroKanren-py This is (yet another) python implementation of microKanren. It's a reasonably 1:1 translation of the code provided in the paper, but ev

Erik Derohanian 3 Dec 10, 2022
Better support for Nuki devices to the Home Assistant

Another attempt to add a better support for Nuki devices to the Home Assistant Features: Lock interface implementation Uses local webhook from bridge

Konstantin 105 Jan 07, 2023
Provide Unifi device info via api to Home Assistant that will give ap sensors

Unifi AP Device info Provide Unifi device info via api to Home Assistant that will give ap sensors

12 Jan 07, 2023
Raspberry Pi Pico development platform for PlatformIO

Raspberry Pi Pico development platform for PlatformIO A few words in the beginning Before experimental please Reinstall the platform Version: 1.0.0 Th

Georgi Angelov 160 Dec 23, 2022
This is a python script to grab data from Zyxel NSA310 NAS and display in Home Asisstant as sensors.

Home-Assistant Python Scripts Python Scripts for Home-Assistant (http://www.home-assistant.io) Zyxel-NSA310-Home-Assistant Monitoring This is a python

6 Oct 31, 2022
Watson-Assistant with integration capabilities

Watson-Assistant-Integration Watson-Assistant with integration capabilities "main.py" should be deployed as Cloud Function (Action) on IBM Cloud. For

Sergey Usachev 1 Dec 20, 2021
A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler.

Env-MCRO A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler. (btw this image is a bit outdated, some of the silkscreen

EnviousData 68 Oct 14, 2022
The project is an open-source and low-cost kit to get started with underactuated robotics.

Torque Limited Simple Pendulum Introduction The project is an open-source and low-cost kit to get started with underactuated robotics. The kit targets

34 Dec 14, 2022
Hook and simulate global keyboard events on Windows and Linux.

keyboard Take full control of your keyboard with this small Python library. Hook global events, register hotkeys, simulate key presses and much more.

BoppreH 3.2k Dec 30, 2022
Brogrammer-keyboard - FIrmware for the Brogrammer Keyboard v1.0

Brogrammer Keyboard Firmware The package contains the firmware that runs on the Brogrammer Keyboard v1.0 See https://imgur.com/a/oY5QZ14 This keyboard

Devin Hartleben 1 Apr 21, 2022
2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

A number of 2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

Arghya Chatterjee 5 Nov 05, 2022
Projet d'integration SRI 3A ROS

projet-integration-sri-2021-2022 Projet d'intégration ROS SRI 2021 2022 Organization: Planification de tâches Perception Saisie: Cédérick Mouliets Sim

AIP Primeca Occitanie 3 Jan 07, 2022
A ESP32 project template with a web interface built in React

ESP AP Webserver demo.mp4 This is my experiment with "mobile app development" for the ESP32. The project consists of two parts, the ESP32 code and the

8 Dec 15, 2022
An embedded application for toy-car controlling based on Raspberry Pi 3 Model B and AlphaBot2-Pi.

An embedded application for toy-car controlling based on Raspberry Pi 3 Model B and AlphaBot2-Pi. This is the source codes of my programming assignmen

StardustDL 4 Oct 19, 2022
Monitor an EnvisaLink alarm module running Honeywell firmware, and set a Nest device to Home/Away depending on whether the alarm is Disarmed/Away.

Nestalarm Monitor an EnvisaLink alarm module running Honeywell firmware, and set a Nest device to Home/Away depending on whether the alarm is Disarmed

1 Dec 30, 2021
A iot Bike sytem based on RaspberryPi, Ardiuino

Cyclic 's Kernel ---- A iot Bike sytem based on RaspberryPi, Ardiuino, etc 0x1 What is This? Cyclic 's Kernel is an independent System With self-produ

Retr0mous 2 Oct 09, 2022
PyLog - Simple keylogger that uses pynput to listen to keyboard input.

Simple keylogger that uses pynput to listen to keyboard input. Outputs to a text file and the terminal. Press the escape key to stop.

1 Dec 29, 2021
LedFx is a network based LED effect controller with support for advanced real-time audio effects

Welcome to LedFx ✨ -Making music come alive! LedFx website: https://ledfx.app/ What is LedFx? What LedFx offers is the ability to take audio input, an

786 Jan 02, 2023