DETReg: Unsupervised Pretraining with Region Priors for Object Detection
Amir Bar, Xin Wang, Vadim Kantorov, Colorado J Reed, Roei Herzig, Gal Chechik, Anna Rohrbach, Trevor Darrell, Amir Globerson
This repository is the implementation of DETReg, see Project Page.
Release
- COCO training code and eval - DONE
- Pretrained models - DONE
- Pascal VOC training code and eval- TODO
Introduction
DETReg is an unsupervised pretraining approach for object DEtection with TRansformers using Region priors. Motivated by the two tasks underlying object detection: localization and categorization, we combine two complementary signals for self-supervision. For an object localization signal, we use pseudo ground truth object bounding boxes from an off-the-shelf unsupervised region proposal method, Selective Search, which does not require training data and can detect objects at a high recall rate and very low precision. The categorization signal comes from an object embedding loss that encourages invariant object representations, from which the object category can be inferred. We show how to combine these two signals to train the Deformable DETR detection architecture from large amounts of unlabeled data. DETReg improves the performance over competitive baselines and previous self-supervised methods on standard benchmarks like MS COCO and PASCAL VOC. DETReg also outperforms previous supervised and unsupervised baseline approaches on low-data regime when trained with only 1%, 2%, 5%, and 10% of the labeled data on MS COCO.
Installation
Requirements
-
Linux, CUDA>=9.2, GCC>=5.4
-
Python>=3.7
We recommend you to use Anaconda to create a conda environment:
conda create -n detreg python=3.7 pip
Then, activate the environment:
conda activate detreg
Installation: (change cudatoolkit to your cuda version. For detailed pytorch installation instructions click here)
conda install pytorch==1.8.0 torchvision==0.9.0 torchaudio==0.8.0 cudatoolkit=10.2 -c pytorch
-
Other requirements
pip install -r requirements.txt
Compiling CUDA operators
cd ./models/ops
sh ./make.sh
# unit test (should see all checking is True)
python test.py
Usage
Dataset preparation
Please download COCO 2017 dataset and ImageNet and organize them as following:
code_root/
└── data/
├── ilsvrc/
├── train/
└── val/
└── MSCoco/
├── train2017/
├── val2017/
└── annotations/
├── instances_train2017.json
└── instances_val2017.json
Note that in this work we used the ImageNet100 dataset, which is x10 smaller than ImageNet. To create ImageNet100 run the following command:
mkdir -p data/ilsvrc100/train
mkdir -p data/ilsvrc100/val
while read line; do ln -s <code_root>/data/ilsvrc/train/$line <code_root>/data/ilsvrc100/train/$line; done < <code_root>/datasets/category.txt
while read line; do ln -s <code_root>/data/ilsvrc/val/$line <code_root>/data/ilsvrc100/val/$line; done < <code_root>/datasets/category.txt
This should results with the following structure:
code_root/
└── data/
├── ilsvrc/
├── train/
└── val/
├── ilsvrc100/
├── train/
└── val/
└── MSCoco/
├── train2017/
├── val2017/
└── annotations/
├── instances_train2017.json
└── instances_val2017.json
Create ImageNet Selective Search boxes:
Download the precomputed ImageNet boxes and extract in the cache folder:
mkdir -p /cache/ilsvrc && cd /cache/ilsvrc
wget https://github.com/amirbar/DETReg/releases/download/1.0.0/ss_box_cache.tar.gz
tar -xf ss_box_cache.tar.gz
Alternatively, you can compute Selective Search boxes yourself:
To create selective search boxes for ImageNet100 on a single machine, run the following command (set num_processes):
python -m datasets.cache_ss --dataset imagenet100 --part 0 --num_m 1 --num_p <num_processes_to_use>
To speed up the creation of boxes, change the arguments accordingly and run the following command on each different machine:
python -m datasets.cache_ss --dataset imagenet100 --part <machine_number> --num_m <num_machines> --num_p <num_processes_to_use>
The cached boxes are saved in the following structure:
code_root/
└── cache/
└── ilsvrc/
Training
The command for pretraining DETReg on 8 GPUs on ImageNet100 is as following:
GPUS_PER_NODE=8 ./tools/run_dist_launch.sh 8 ./configs/DETReg_top30_in100.sh --batch_size 24 --num_workers 8
Training takes around 1.5 days with 8 NVIDIA V100 GPUs, you can download a pretrained model (see below) if you want to skip this step.
After pretraining, a checkpoint is saved in exps/DETReg_top30_in100/checkpoint.pth. To fine tune it over different coco settings use the following commands: Fine tuning on full COCO (should take 2 days with 8 NVIDIA V100 GPUs):
GPUS_PER_NODE=8 ./tools/run_dist_launch.sh 8 ./configs/DETReg_fine_tune_full_coco.sh
For smaller subsets which trains faster, you can use smaller number of gpus (e.g 4 with batch size 2)/ Fine tuning on 1%
GPUS_PER_NODE=4 ./tools/run_dist_launch.sh 4 ./configs/DETReg_fine_tune_1pct_coco.sh --batch_size 2
Fine tuning on 2%
GPUS_PER_NODE=4 ./tools/run_dist_launch.sh 4 ./configs/DETReg_fine_tune_2pct_coco.sh --batch_size 2
Fine tuning on 5%
GPUS_PER_NODE=4 ./tools/run_dist_launch.sh 4 ./configs/DETReg_fine_tune_5pct_coco.sh --batch_size 2
Fine tuning on 10%
GPUS_PER_NODE=4 ./tools/run_dist_launch.sh 4 ./configs/DETReg_fine_tune_10pct_coco.sh --batch_size 2
Evaluation
To evaluate a finetuned model, use the following command from the project basedir:
./configs/<config file>.sh --resume exps/<config file>/checkpoint.pth --eval
Pretrained Models
Cite
If you found this code helpful, feel free to cite our work:
@misc{bar2021detreg,
title={DETReg: Unsupervised Pretraining with Region Priors for Object Detection},
author={Amir Bar and Xin Wang and Vadim Kantorov and Colorado J Reed and Roei Herzig and Gal Chechik and Anna Rohrbach and Trevor Darrell and Amir Globerson},
year={2021},
eprint={2106.04550},
archivePrefix={arXiv},
primaryClass={cs.CV}
}
Related Works
If you found DETReg useful, consider checking out these related works as well: ReSim, SwAV, DETR, UP-DETR, and Deformable DETR.
Acknowlegments
DETReg builds on previous works code base such as Deformable DETR and UP-DETR. If you found DETReg useful please consider citing these works as well.
![checkpoint_args = torch.load(args.resume, map_location='cpu')['args'] KeyError: 'args'？？？](https://avatars.githubusercontent.com/u/46257112?v=4)
17 Dec 20, 2022
1 Dec 04, 2021
9 Oct 28, 2022
88 Dec 28, 2022
5.3k Jan 03, 2023
14 May 13, 2022
68 Jan 03, 2023
1 Oct 15, 2021
2.6k Jan 04, 2023
35 Sep 14, 2022
32 Apr 24, 2022
29 Dec 26, 2022
1k Dec 30, 2022
708 Dec 19, 2022
37 Dec 15, 2022
98 Dec 15, 2022
159 Dec 15, 2022
2 Mar 17, 2022
57 Nov 14, 2022
1 Jan 18, 2022