DongshanPI Seven for STM32MP157DAC.

Related tags

Hardwarelinuxststm32mp1buildroot-external-tree
Overview

STM32MP1 Buildroot External Tree

这个Git仓库专门支持ST的平台。由于Buildroot主线已经支持了stm32mp1系列，这个是针对 东山PI柒号 开发板专门支持的 BR2_EXTERNAL 外部扩展支持。

支持的配置文件

这个 BR2_EXTERNAL 扩展支持了如下配置文件：

  1. dongshanpiserven_core_defconfig, 这是一个最小配置文件，支持了 TF-A 固件 U-boot Linux Kernel ，以及最小的busybox用户空间。
Feature
TF-A v2.2-stm32mp-r1
U-Boot v2020.10-stm32mp-r1.1
Linux v5.4-stm32mp-r1
OP-TEE No
Qt5 No
OpenGL No
WiFi N/A
Bluetooth N/A
Audio No
CubeMX Device Tree No
Cortex M4 Firmware examples No

快速开始

环境配置

为了使用 Buildroot，您需要在您的工作站上安装 Linux 发行版。 任何最新的 Linux 发行版（Ubuntu、Debian、Fedora、Redhat、OpenSuse 等）都可以正常工作。 但是你需要安装一些必要软件包至您的Linux工作站才可以使用Buildroot manual System requirements section. 对于 Debian/Ubuntu发行版系统，需要参考下述命令安装列出来的软件包。

$ sudo apt install debianutils sed make binutils build-essential gcc g++ bash patch gzip bzip2 perl tar cpio unzip rsync file bc git

获取代码

这个 BR2_EXTERNAL会配合着最新的LTS版本一起使用，所以版本会随着 上游的更新而建立新的分支进行更新，目前Buildroot最新 BR2_EXTERNAL最新LTS版本是 2021-02 。

首先我们获取 buildroot最新lts版本源码。

  • 使用git clone
$ git clone -b st/2021.02 https://github.com/bootlin/buildroot.git
  • 直接下载
wget  https://buildroot.org/downloads/buildroot-2021.02.8.tar.bz2

获取buildroot源码后，可以单独获取我们支持 东山PI柒号 的 BR2_EXTERNAL 源码。

$ git clone -b main https://github.com/bootlin/buildroot-external-dongshanpiseven.git

获取完成后，可以看到 一个 buildroot目录和一个 buildroot-external-dongshanpiseven目录。

配置并构建

首先进入到buildroot目录

$ cd buildroot/

接下来执行配置命令，来使用 dongshanpiserven_core_defconfig配置文件进行配置。

buildrot/ $ make BR2_EXTERNAL=../buildroot-external-dongshanpiseven dongshanpiserven_core_defconfig

指定配置文件后，可以使用 make menuconfig 命令来增加自己需要的包。

增加完成软件包后，就可以直接执行 make 命令开始编译了。

buildroot/ $ make

编译时会自动下载所需的软件包，进行配置编译最后打包成一个完成的系统镜像，整个时间受网络环境而定，一般情况下 只需要60分钟。

烧写并启动系统

编译完成后，会生成一个sdcard.img 系统镜像，镜像文件存放在 output/images/目录下。

执行如下命令讲镜像烧录进 tf卡即可，注意 /dev/sdX sdX 指的是tf卡设备的主分区。

buildroot/ $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M

烧写完成后，将卡插入至开发板，连接电源线，设置为 tf卡启动，即可启动开发板，之后连接串口，等待进入终端命令行，系统默认的登录用户名是 root 。

References

Support

You might also like...
Releases(v0.5.1-beta.1)
Owner
DongshanPI
DongshanPI
GitHub Repository https://dongshanpi.com/DongshanPi-Seven/01-BoardIntroduction/
Pi-hole with Inky pHAT ePaper display

Pi-hole with Inky pHAT ePaper display This is my Pi-hole with an ePaper display.

11 Sep 13, 2022
My self-hosting infrastructure, fully automated from empty disk to operating services

Khue's Homelab Current status: ALPHA This project utilizes Infrastructure as Code to automate provisioning, operating, and updating self-hosted servic

Khue Doan 6.4k Dec 31, 2022
The PicoEMP is a low-cost Electromagnetic Fault Injection (EMFI) tool,

ChipSHOUTER-PicoEMP The PicoEMP is a low-cost Electromagnetic Fault Injection (EMFI) tool, designed specifically for self-study and hobbiest research.

NewAE Technology Inc. 312 Jan 07, 2023
An IoT Trivia app that shows you how to take a JSON web API such as the opentdb.com API and stream and display it on a FeatherS2 in an OLED display.

CircuitPython IoT Trivia ESP32-S2 OLED Version An IoT Trivia app that shows you how to take a JSON web API such as the opentdb.com API and stream and

Kevin Thomas 1 Nov 27, 2021
An open source two key macro-pad modeled to look like a cartoony melting popsicle

macropopsicle An open source two key macro-pad modeled to look like a cartoony melting popsicle. Build instructions Parts List -1x Top case half (3D p

17 Aug 18, 2022
A Home Assistant integration for Solaredge inverters

A Home Assistant integration for Solaredge inverters. Supports multiple inverters chained through RS485.

Seth 50 Dec 23, 2022
Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi

Clean Dashboard for Pi-Hole Minimal and clean dashboard to visualize some stats of Pi-Hole with an E-Ink display attached to your Raspberry Pi.

Alessio Santoru 104 Dec 14, 2022
NYCT-GTFS - Real-time NYC subway data parsing for humans

NYCT-GTFS - Real-time NYC subway data parsing for humans This python library provides a human-friendly, native python interface for dealing with the N

Andrew Dickinson 37 Dec 27, 2022
Python Keylogger for Linux

A keylogger is a program that records your keystrokes, this program saves them in a .txt file on your local computer and, after 30 seconds (or as long as you want), it will close the .txt file and se

Darío Mazzitelli 4 Jul 31, 2021
Code for the onshape macropad.

Onshape_Macropad Code for the onshape macropad. This is a macropad built using the Pimoroni Keybow and the KPrepublic Enclosure. pimoroni_keybow kprep

Justin Cole 1 Nov 23, 2021
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

Alternative firmware for ESP8266/ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability

Theo Arends 59 Dec 26, 2022
A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler.

Env-MCRO A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler. (btw this image is a bit outdated, some of the silkscreen

EnviousData 68 Oct 14, 2022
A install script for installing qtile and my configs on Raspberry Pi OS

QPI OS - Qtile + Raspberry PI OS Qtile + Raspberry Pi OS :) Installation Run this command in the terminal

RPICoder 3 Dec 19, 2021
Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)

TMorse Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;) Compatible with python3.9+. No third-party library is required

Mahyar 2 Jul 11, 2022
Better support for Nuki devices to the Home Assistant

Another attempt to add a better support for Nuki devices to the Home Assistant Features: Lock interface implementation Uses local webhook from bridge

Konstantin 105 Jan 07, 2023
A python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane

Dorna-Robotics-Internship Code In the directory "Code" is a python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane. I

Stephen Otto 2 Dec 06, 2021
Component for deep integration LedFx from Home Assistant.

LedFX for Home Assistant Component for deep integration LedFx from Home Assistant. Table of Contents FAQ Install Config Performance FAQ Q. What versio

Dmitry Mamontov 28 Dec 13, 2022
This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

ThyagoKZKR 2 Jul 18, 2022
uOTA - OTA updater for MicroPython

Update your device firmware written in MicroPython over the air. Suitable for private and/or larger projects with many files.

Martin Komon 25 Dec 19, 2022
HomeAssistant - Polyaire AirTouch 4 Integration

HomeAssistant - Polyaire AirTouch 4 Integration Custom integration to add an AirTouch 4 AC Controller Installation: Copy contents of custom_components

7 Aug 05, 2022