This RaspberryPi project uses weather data to estimate the share of renewable energy in the power grid. From this, the value of CO2 emissions per kWh can be calculated. Visit https://www.agora-energiewende.de/service/agorameter/ for an overview of the electricity mix and the emission value.
The estimated emission value is displayed similar to a traffic light on a green-red scale by leds connected to the RaspberryPi.
raspberrypi-tools how to install: first clone this project: git clone https://github.com/Ardumine/rpi-tools.git then go to the folder cd rpi-tools and
aioesphomeapi aioesphomeapi allows you to interact with devices flashed with ESPHome. Installation The module is available from the Python Package Ind
This is a simple python script that will run a docker container to pull data from Drobo. It will give information like (Name, serial, firmware, disk-total, disk-used, disk-free and individual disk st
PiCameleon Is a daemon program meant to provide the RaspberryPi Camera as a service while running according to a configuration.
Python-based-AI-Assistant I have used python functional programming to make this Ai assistant. Inspiration of project : we have seen in our daily life
A script for performing OTA update over BLE on ESP32
AERO - 421 Final Project Redevelopment Spacecraft Attitude, Dynamics, and Control: Simulation to determine and control a satellite's attitude in LEO.
HomeassistantAPI Python Wrapper for Homeassistant's REST API Please ⭐️ the repo if you find this project useful or cool! Here is a quick example. from
keyboard Take full control of your keyboard with this small Python library. Hook global events, register hotkeys, simulate key presses and much more.
iDracPowerMonitorMQTT This script publishes iDrac power draw data for iDrac 6 enabled servers to an MQTT broker. This can be used to integrate the pow
An embedded application for toy-car controlling based on Raspberry Pi 3 Model B and AlphaBot2-Pi. This is the source codes of my programming assignmen
Cascade Drone Swarm Physical Demonstration Project Table of Contents About The Project Built With Getting Started Prerequisites Installation About The
QRCam This custom component creates cameras displaying qrcodes. The QRCodes can be static or generated from templates. If you use a template as conten
robot_inverse_kinematics Project setup # put the package in the workspace $ cd ~/catkin_ws/ $ catkin_make $ source devel/setup.bash Description In thi
Another attempt to add a better support for Nuki devices to the Home Assistant Features: Lock interface implementation Uses local webhook from bridge
PDV PDV is LiDAR 3D object detection method. This repository is based off [OpenPCDet]. Point Density-Aware Voxels for LiDAR 3D Object Detection Jordan
Torque Limited Simple Pendulum Introduction The project is an open-source and low-cost kit to get started with underactuated robotics. The kit targets
plantsensor A Raspberry Pi Pico plant sensor hub coded in Micropython I used: 1x Raspberry Pi Pico - microcontroller 1x Waveshare Pico OLED 1.3 - scre
Raspberry-Pi-Pico-as-a-Rubber-Ducky Kurulum Raspberry Pi Pico cihazınız için CircuitPython'u indirin. Boot düğmesine basılı tutarken cihazı bir USB ba
A refreshed Python toolbox for building complex digital hardware
1 Jan 04, 2022
76 Jan 04, 2023
1 Jan 15, 2022
52 Oct 16, 2022
2 Dec 26, 2021
18 Dec 15, 2022
3 Dec 16, 2022
29 Dec 31, 2022
3.2k Dec 30, 2022
10 Oct 06, 2022
4 Oct 19, 2022
3 Aug 24, 2022
5 Oct 06, 2022
2 Dec 08, 2022
105 Jan 07, 2023
114 Dec 21, 2022
34 Dec 14, 2022
78 Sep 20, 2022
6 Dec 13, 2022
1k Jan 05, 2023