xdist: pytest distributed testing plugin
The pytest-xdist plugin extends pytest with some unique test execution modes:
- test run parallelization: if you have multiple CPUs or hosts you can use those for a combined test run. This allows to speed up development or to use special resources of remote machines.
--looponfail: run your tests repeatedly in a subprocess. After each run pytest waits until a file in your project changes and then re-runs the previously failing tests. This is repeated until all tests pass after which again a full run is performed.- Multi-Platform coverage: you can specify different Python interpreters or different platforms and run tests in parallel on all of them.
Before running tests remotely, pytest efficiently "rsyncs" your program source code to the remote place. All test results are reported back and displayed to your local terminal. You may specify different Python versions and interpreters.
If you would like to know how pytest-xdist works under the covers, checkout OVERVIEW.
Installation
Install the plugin with:
pip install pytest-xdist
To use psutil for detection of the number of CPUs available, install the psutil extra:
pip install pytest-xdist[psutil]
Speed up test runs by sending tests to multiple CPUs
To send tests to multiple CPUs, use the -n (or --numprocesses) option:
pytest -n NUMCPUS
Pass -n auto to use as many processes as your computer has CPU cores. This can lead to considerable speed ups, especially if your test suite takes a noticeable amount of time.
If a test crashes a worker, pytest-xdist will automatically restart that worker and report the test’s failure. You can use the --max-worker-restart option to limit the number of worker restarts that are allowed, or disable restarting altogether using --max-worker-restart 0.
By default, using --numprocesses will send pending tests to any worker that is available, without any guaranteed order. You can change the test distribution algorithm this with the --dist option. It takes these values:
--dist no: The default algorithm, distributing one test at a time.--dist loadscope: Tests are grouped by module for test functions and by class for test methods. Groups are distributed to available workers as whole units. This guarantees that all tests in a group run in the same process. This can be useful if you have expensive module-level or class-level fixtures. Grouping by class takes priority over grouping by module.--dist loadfile: Tests are grouped by their containing file. Groups are distributed to available workers as whole units. This guarantees that all tests in a file run in the same worker.
Making session-scoped fixtures execute only once
pytest-xdist is designed so that each worker process will perform its own collection and execute a subset of all tests. This means that tests in different processes requesting a high-level scoped fixture (for example session) will execute the fixture code more than once, which breaks expectations and might be undesired in certain situations.
While pytest-xdist does not have a builtin support for ensuring a session-scoped fixture is executed exactly once, this can be achieved by using a lock file for inter-process communication.
The example below needs to execute the fixture session_data only once (because it is resource intensive, or needs to execute only once to define configuration options, etc), so it makes use of a FileLock to produce the fixture data only once when the first process requests the fixture, while the other processes will then read the data from a file.
Here is the code:
import json
import pytest
from filelock import FileLock
@pytest.fixture(scope="session")
def session_data(tmp_path_factory, worker_id):
if worker_id == "master":
# not executing in with multiple workers, just produce the data and let
# pytest's fixture caching do its job
return produce_expensive_data()
# get the temp directory shared by all workers
root_tmp_dir = tmp_path_factory.getbasetemp().parent
fn = root_tmp_dir / "data.json"
with FileLock(str(fn) + ".lock"):
if fn.is_file():
data = json.loads(fn.read_text())
else:
data = produce_expensive_data()
fn.write_text(json.dumps(data))
return data
The example above can also be use in cases a fixture needs to execute exactly once per test session, like initializing a database service and populating initial tables.
This technique might not work for every case, but should be a starting point for many situations where executing a high-scope fixture exactly once is important.
Running tests in a Python subprocess
To instantiate a python3.5 subprocess and send tests to it, you may type:
pytest -d --tx popen//python=python3.5
This will start a subprocess which is run with the python3.5 Python interpreter, found in your system binary lookup path.
If you prefix the --tx option value like this:
--tx 3*popen//python=python3.5
then three subprocesses would be created and tests will be load-balanced across these three processes.
Running tests in a boxed subprocess
This functionality has been moved to the pytest-forked plugin, but the --boxed option is still kept for backward compatibility.
Sending tests to remote SSH accounts
Suppose you have a package mypkg which contains some tests that you can successfully run locally. And you have a ssh-reachable machine myhost. Then you can ad-hoc distribute your tests by typing:
pytest -d --tx ssh=myhostpopen --rsyncdir mypkg mypkg
This will synchronize your mypkg package directory to a remote ssh account and then locally collect tests and send them to remote places for execution.
You can specify multiple --rsyncdir directories to be sent to the remote side.
Note
For pytest to collect and send tests correctly you not only need to make sure all code and tests directories are rsynced, but that any test (sub) directory also has an __init__.py file because internally pytest references tests as a fully qualified python module path. You will otherwise get strange errors during setup of the remote side.
You can specify multiple --rsyncignore glob patterns to be ignored when file are sent to the remote side. There are also internal ignores: .*, *.pyc, *.pyo, *~ Those you cannot override using rsyncignore command-line or ini-file option(s).
Sending tests to remote Socket Servers
Download the single-module socketserver.py Python program and run it like this:
python socketserver.py
It will tell you that it starts listening on the default port. You can now on your home machine specify this new socket host with something like this:
pytest -d --tx socket=192.168.1.102:8888 --rsyncdir mypkg mypkg
Running tests on many platforms at once
The basic command to run tests on multiple platforms is:
pytest --dist=each --tx=spec1 --tx=spec2
If you specify a windows host, an OSX host and a Linux environment this command will send each tests to all platforms - and report back failures from all platforms at once. The specifications strings use the xspec syntax.
Identifying the worker process during a test
New in version 1.15.
If you need to determine the identity of a worker process in a test or fixture, you may use the worker_id fixture to do so:
@pytest.fixture()
def user_account(worker_id):
""" use a different account in each xdist worker """
return "account_%s" % worker_id
When xdist is disabled (running with -n0 for example), then worker_id will return "master".
Worker processes also have the following environment variables defined:
PYTEST_XDIST_WORKER: the name of the worker, e.g.,"gw2".PYTEST_XDIST_WORKER_COUNT: the total number of workers in this session, e.g.,"4"when-n 4is given in the command-line.
The information about the worker_id in a test is stored in the TestReport as well, under the worker_id attribute.
Since version 2.0, the following functions are also available in the xdist module:
def is_xdist_worker(request_or_session) -> bool:
"""Return `True` if this is an xdist worker, `False` otherwise
:param request_or_session: the `pytest` `request` or `session` object
"""
def is_xdist_master(request_or_session) -> bool:
"""Return `True` if this is the xdist master, `False` otherwise
Note: this method also returns `False` when distribution has not been
activated at all.
:param request_or_session: the `pytest` `request` or `session` object
"""
def get_xdist_worker_id(request_or_session) -> str:
"""Return the id of the current worker ('gw0', 'gw1', etc) or 'master'
if running on the 'master' node.
If not distributing tests (for example passing `-n0` or not passing `-n` at all) also return 'master'.
:param request_or_session: the `pytest` `request` or `session` object
"""
Uniquely identifying the current test run
New in version 1.32.
If you need to globally distinguish one test run from others in your workers, you can use the testrun_uid fixture. For instance, let's say you wanted to create a separate database for each test run:
import pytest
from posix_ipc import Semaphore, O_CREAT
@pytest.fixture(scope="session", autouse=True)
def create_unique_database(testrun_uid):
""" create a unique database for this particular test run """
database_url = f"psql://myapp-{testrun_uid}"
with Semaphore(f"/{testrun_uid}-lock", flags=O_CREAT, initial_value=1):
if not database_exists(database_url):
create_database(database_url)
@pytest.fixture()
def db(testrun_uid):
""" retrieve unique database """
database_url = f"psql://myapp-{testrun_uid}"
return database_get_instance(database_url)
Additionally, during a test run, the following environment variable is defined:
PYTEST_XDIST_TESTRUNUID: the unique id of the test run.
Accessing sys.argv from the master node in workers
To access the sys.argv passed to the command-line of the master node, use request.config.workerinput["mainargv"].
Specifying test exec environments in an ini file
You can use pytest's ini file configuration to avoid typing common options. You can for example make running with three subprocesses your default like this:
[pytest]
addopts = -n3
You can also add default environments like this:
[pytest]
addopts = --tx ssh=myhost//python=python3.5 --tx ssh=myhost//python=python3.6
and then just type:
pytest --dist=each
to run tests in each of the environments.
Specifying "rsync" dirs in an ini-file
In a tox.ini or setup.cfg file in your root project directory you may specify directories to include or to exclude in synchronisation:
[pytest]
rsyncdirs = . mypkg helperpkg
rsyncignore = .hg
These directory specifications are relative to the directory where the configuration file was found.
![[WIP] Issue #130](https://avatars.githubusercontent.com/u/5649864?v=4)
![[info] pytest-xdist worker crash then log something](https://avatars.githubusercontent.com/u/66110943?v=4)
209 Dec 20, 2022
5 Mar 05, 2022
14 Sep 26, 2022
31 May 28, 2021
12 Dec 04, 2022
122 Nov 22, 2022
1 Dec 01, 2021
714 Dec 21, 2022
269 Dec 16, 2022
49 Oct 18, 2022
3 Jan 18, 2022
2 Jun 17, 2022
1.6k Dec 29, 2022
756 Dec 22, 2022
424 Nov 28, 2022
13 Jul 07, 2022
14 Jan 25, 2022
249 Dec 14, 2022