gmqtt: Python async MQTT client implementation.
Installation
The latest stable version is available in the Python Package Index (PyPi) and can be installed using
pip3 install gmqtt
Usage
Getting Started
Here is a very simple example that subscribes to the broker TOPIC topic and prints out the resulting messages:
import asyncio
import os
import signal
import time
from gmqtt import Client as MQTTClient
# gmqtt also compatibility with uvloop
import uvloop
asyncio.set_event_loop_policy(uvloop.EventLoopPolicy())
STOP = asyncio.Event()
def on_connect(client, flags, rc, properties):
print('Connected')
client.subscribe('TEST/#', qos=0)
def on_message(client, topic, payload, qos, properties):
print('RECV MSG:', payload)
def on_disconnect(client, packet, exc=None):
print('Disconnected')
def on_subscribe(client, mid, qos, properties):
print('SUBSCRIBED')
def ask_exit(*args):
STOP.set()
async def main(broker_host, token):
client = MQTTClient("client-id")
client.on_connect = on_connect
client.on_message = on_message
client.on_disconnect = on_disconnect
client.on_subscribe = on_subscribe
client.set_auth_credentials(token, None)
await client.connect(broker_host)
client.publish('TEST/TIME', str(time.time()), qos=1)
await STOP.wait()
await client.disconnect()
if __name__ == '__main__':
loop = asyncio.get_event_loop()
host = 'mqtt.flespi.io'
token = os.environ.get('FLESPI_TOKEN')
loop.add_signal_handler(signal.SIGINT, ask_exit)
loop.add_signal_handler(signal.SIGTERM, ask_exit)
loop.run_until_complete(main(host, token))
MQTT Version 5.0
gmqtt supports MQTT version 5.0 protocol
Version setup
Version 5.0 is used by default. If your broker does not support 5.0 protocol version and responds with proper CONNACK reason code, client will downgrade to 3.1 and reconnect automatically. Note, that some brokers just fail to parse the 5.0 format CONNECT packet, so first check manually if your broker handles this properly. You can also force version in connect method:
from gmqtt.mqtt.constants import MQTTv311
client = MQTTClient('clientid')
client.set_auth_credentials(token, None)
await client.connect(broker_host, 1883, keepalive=60, version=MQTTv311)
Properties
MQTT 5.0 protocol allows to include custom properties into packages, here is example of passing response topic property in published message:
TOPIC = 'testtopic/TOPIC'
def on_connect(client, flags, rc, properties):
client.subscribe(TOPIC, qos=1)
print('Connected')
def on_message(client, topic, payload, qos, properties):
print('RECV MSG:', topic, payload.decode(), properties)
async def main(broker_host, token):
client = MQTTClient('asdfghjk')
client.on_message = on_message
client.on_connect = on_connect
client.set_auth_credentials(token, None)
await client.connect(broker_host, 1883, keepalive=60)
client.publish(TOPIC, 'Message payload', response_topic='RESPONSE/TOPIC')
await STOP.wait()
await client.disconnect()
Connect properties
Connect properties are passed to Client object as kwargs (later they are stored together with properties received from broker in client.properties field). See example below.
session_expiry_interval-intSession expiry interval in seconds. If the Session Expiry Interval is absent the value 0 is used. If it is set to 0, or is absent, the Session ends when the Network Connection is closed. If the Session Expiry Interval is 0xFFFFFFFF (max possible value), the Session does not expire.receive_maximum-intThe Client uses this value to limit the number of QoS 1 and QoS 2 publications that it is willing to process concurrently.user_property-tuple(str, str)This property may be used to provide additional diagnostic or other information (key-value pairs).maximum_packet_size-intThe Client uses the Maximum Packet Size (in bytes) to inform the Server that it will not process packets exceeding this limit.
Example:
client = gmqtt.Client("lenkaklient", receive_maximum=24000, session_expiry_interval=60, user_property=('myid', '12345'))
Publish properties
This properties will be also sent in publish packet from broker, they will be passed to on_message callback.
message_expiry_interval-intIf present, the value is the lifetime of the Application Message in seconds.content_type-unicodeUTF-8 Encoded String describing the content of the Application Message. The value of the Content Type is defined by the sending and receiving application.user_property-tuple(str, str)subscription_identifier-int(see subscribe properties) sent by brokertopic_alias-intFirst client publishes messages with topic string and kwarg topic_alias. After this initial message client can publish message with empty string topic and same topic_alias kwarg.
Example:
def on_message(client, topic, payload, qos, properties):
# properties example here: {'content_type': ['json'], 'user_property': [('timestamp', '1524235334.881058')], 'message_expiry_interval': [60], 'subscription_identifier': [42, 64]}
print('RECV MSG:', topic, payload, properties)
client.publish('TEST/TIME', str(time.time()), qos=1, retain=True, message_expiry_interval=60, content_type='json')
Subscribe properties
subscription_identifier-intIf the Client specified a Subscription Identifier for any of the overlapping subscriptions the Server MUST send those Subscription Identifiers in the message which is published as the result of the subscriptions.
Reconnects
By default, connected MQTT client will always try to reconnect in case of lost connections. Number of reconnect attempts is unlimited. If you want to change this behaviour, do the following:
client = MQTTClient("client-id")
client.set_config({'reconnect_retries': 10, 'reconnect_delay': 60})
Code above will set number of reconnect attempts to 10 and delay between reconnect attempts to 1min (60s). By default reconnect_delay=6 and reconnect_retries=-1 which stands for infinity. Note that manually calling await client.disconnect() will set reconnect_retries for 0, which will stop auto reconnect.
Asynchronous on_message callback
You can define asynchronous on_message callback. Note that it must return valid PUBACK code (0 is success code, see full list in constants)
async def on_message(client, topic, payload, qos, properties):
pass
return 0
Other examples
Check examples directory for more use cases.
![GMQTT with TLS: ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed](https://avatars.githubusercontent.com/u/20524187?v=4)
![[PROPERTIES] received invalid property id 105, disconnecting](https://avatars.githubusercontent.com/u/9843819?v=4)
62 Dec 08, 2022
1 Jan 10, 2022
7 Jun 01, 2022
27 Nov 04, 2022
37 Dec 20, 2022
1 May 19, 2022
5 Nov 30, 2022
5 Dec 15, 2022
0 Aug 04, 2022
45 Mar 28, 2022
3 Dec 14, 2021
2 Jan 06, 2022
17 Nov 27, 2022
1 Feb 02, 2022
2 May 12, 2022
9 Dec 16, 2022
2 Jan 15, 2022
5 Mar 26, 2022
1 Feb 09, 2022
13 Jun 28, 2022