ModbusTCP2MQTT - Sungrow & SMA Solar Inverter addon for Home Assistant

Last update: Dec 21, 2022

Related tags

Hardware ModbusTCP2MQTT

Overview

ModbusTCP2MQTT

Sungrow & SMA Solar Inverter addon for Home Assistant

This addon will connect directly to your Inverter using Modbus TCP.

Support models

The Inverter must be accessible on the network using TCP.

modbus-sma-SBn_n-1AV-40

modbus-sungrow-sg3kd

modbus-sungrow-sg3ks

modbus-sungrow-sg5kd

modbus-sungrow-sg8kd

modbus-sungrow-sg10kt

modbus-sungrow-sg10rt

modbus-sungrow-sh5k

Installation

Navigate in your Home Assistant frontend to Supervisor -> Add-on Store.
Click the 3-dots menu at upper right ... > Repositories and add https://github.com/TenySmart/HassioAddons
Install ModbusTCP2MQTT Addon
Configure and Start it

Meta

This add-on is based on solariot

Owner

Teny Smart

Teny Smart Smarthome

GitHub Repository

A Macropad using the Raspberry Pi Pico, programmed with CircuitPython.

15 Oct 14, 2022

3D-printable hexagonal mirror array capable of reflecting sunlight into arbitrary patterns

2.3k Dec 30, 2022

Samples for robotics, node, python, and bash

RaspberryPi Robot Project Technologies: Render: intent Currently designed to act as programmable sentry.

1 May 31, 2022

Ha-rpi gpio - Home Assistant Raspberry Pi GPIO Integration

Home Assistant Raspberry Pi GPIO custom integration This is a spin-off from the

98 Dec 24, 2022

A Home Assistant integration for Solaredge inverters

A Home Assistant integration for Solaredge inverters. Supports multiple inverters chained through RS485.

50 Dec 23, 2022

ok-system-helper是一个简单的系统硬件的实时信息收集工具，使用python3.x开发

ok-system-helper ok-system-helper是一个简单的系统硬件的实时信息收集工具，使用python3.x开发，支持哪些硬件：CPU、内存、SWAP、磁盘、网卡流量。用户可在自己的项目中直接引入、开箱即用，或者结合flask等web框架轻松做成http接口供前端调用，亦可通过注

1 Feb 08, 2022

The example shows using local self-hosted runners on-premises by making use of a runner on a Raspberry Pi with LED's attached to it

6 Nov 13, 2021

gdsfactory is an EDA (electronics design automation) tool to Layout Integrated Circuits.

gdsfactory 3.5.5 gdsfactory is an EDA (electronics design automation) tool to Layout Integrated Circuits. It is build on top of phidl gdspy and klayou

147 Jan 04, 2023

ROS2 nodes for Waveshare Alphabot2-Pi mobile robot.

ROS2 for Waveshare Alphabot2-Pi This repo contains ROS2 packages for the Waveshare Alphabot2-Pi mobile robot: alphabot2: it contains the nodes used to

2 Oct 11, 2022

SPI driven CircuitPython driver for PCA9745B constant current LED driver.

Introduction THIS IS VERY MUCH ALPHA AND IN ACTIVE DEVELOPMENT. THINGS WILL BREAK! THIS MAY ALSO BREAK YOUR THINGS! SPI driven CircuitPython driver fo

1 Jan 14, 2022

Raspberry Pi Pico and LoRaWAN from CircuitPython

Raspberry Pi Pico and LoRaWAN from CircuitPython Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040-based board using CircuitPython

15 Oct 08, 2022

A IC scan test interface for Arduino

ICSCAN_ARDUINO Prerequisites Python 3.6 or higher arduino uno or nano what is this It is a bitstream tranceiver to test IC chip It sends bitstream to

0 Sep 15, 2022

Terkin is a flexible data logger application for MicroPython and CPython environments.

Terkin Data logging for humans, written in MicroPython. Documentation: https://terkin.org/ Source Code: https://github.com/hiveeyes/terkin-datalogger

45 Dec 15, 2022

Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;)

TMorse Run this code to blink your ThinkPad LED with a hidden mysterious Morse code! ;) Compatible with python3.9+. No third-party library is required

2 Jul 11, 2022

GUI wrapper designed for convenient service work with TI CC1352/CC2538/CC2652 based Zigbee sticks or gateways. Packed into single executable file

ZigStar GW Multi tool is GUI wrapper firtsly designed for convenient service work with Zig Star LAN GW, but now supports any TI CC1352/CC2538/CC2652 b

133 Jan 01, 2023